manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 344 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 344

Setup Mode (Type B-3, Type

B-4)

Press the [SETUP] button to display the

Setup screen.

You can select and control options rela‐

ted  to  [Display],  [Sound],  [Phone]  and

[System].

With the Display Button

Press  the  [SETUP]  button 

  Select

[Display]

You can select and control options rela‐

ted  to  [Brightness],  [Mode  Pop  up],

[Text Scroll] and [Media Display].

Adjusting the Brightness

Use  the  [Left/Right]  buttons  to  adjust

the screen brightness or set the Bright‐

ness on Automatic, Day or Night mode.

Press the [Default] button to reset.

• Automatic  :  Adjusts  the  brightness

automatically.

• Day  :  Always  maintains  the  bright‐

ness on high.

• Night  :  Always  maintains  the  bright‐

ness on low.

Mode Pop up

This  feature  is  used  to  display  the

Mode Pop up screen when entering ra‐

dio and media modes.

When  this  feature  is  turned  on,  press‐

ing  the  [RADIO]  or  [MEDIA]  button  will

display the Mode Pop up screen.

NOTICE

The  media  Mode  Pop  up  screen  can

be displayed only when two or more

media modes have been connected.

Audio system

 

 

5-104

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments