Kia CERATO 2018 Owner'S Manual Download Page 338

Page: 338 / 602

Commands available during

Bluetooth

Wireless Technology

audio streaming from mobile phone operation Command Op‐

eration.

Command

Function

Play

Plays the currently paused song.

Command

Function

Pause

Pauses the current song.

Setup Mode (Type B-1, Type

B-2)

Press the [SETUP] button to display the

Setup screen.

You can select and control options rela‐

ted to [Display], [Sound], [Phone] and

[System].

With the Display Button

Press the [SETUP] button

Select

[Display]

You can select and control options rela‐

ted to [Brightness], [Pop-up Mode],

[Scroll text] and [Song Info].

Adjusting the Brightness

Use the [Left/Right] buttons to adjust

the screen brightness or set the Bright‐

ness on Automatic, Day or Night mode.

Press the [Default] button to reset.

• Automatic : Adjusts the brightness

automatically.

• Day : Always maintains the bright‐

ness on high.

• Night : Always maintains the bright‐

ness on low.

Pop-up Mode

This feature is used to display the Pop-

up Mode screen when entering radio

and media modes.

When this feature is turned on, press‐

ing the [RADIO] or [MEDIA] button will

display the Pop-up Mode screen.

Audio system

5-98

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 338 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: