Kia CERATO 2018 Owner'S Manual Download Page 331

Page: 331 / 602

(Continued)

• Upon downloading contacts data,

previously saved contacts data will

be deleted.

• Downloading is not possible if the

contacts download feature is
turned off within the

Bluetooth

Wireless Technology device. Also,

some devices may require device

authorization upon attempting to

download. If downloading cannot

be normally conducted, check the

Bluetooth

Wireless Technology

device setting or the screen state.

• Caller ID information will not be

displayed for unsaved callers.

• The download feature may not be

supported in some mobile phones.
Check to see that the

Bluetooth

Wireless Technology device sup‐

ports the download feature.

Voice Recognition Mode (if

equipped)

Using Voice Recognition

Starting Voice Recognition
Shortly press the

button on the

steering wheel controls Say a com‐

mand.

If voice recognition is in [Normal Mode],

then the system will say Please say a

command. Ding~

• If voice recognition is in [Expert

Mode], then the system will only say

a Ding~

• To change the Normal Mode/Expert

Mode setting, go to [SETUP] [Sys‐

tem] [Voice Recognition System].

For proper recognition, say the com‐

mand after the voice instruction and

beep tone.

NOTICE

Phonebook List Best Practice

1. Do not store single-name en‐

tries (e.g., Bob , Mom , Kim ,

etc.). Instead, always use full

names (including first and last

names) for phonebook (e.g., use

Jacob Stevenson instead of

Dad ).

2. Do not use abbreviations (i.e.,

use Lieutenant instead of Lt.

or Sergeant instead of Sgt. ).

(Continued)

5-91

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 331 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: