Kia CERATO 2018 Owner'S Manual Download Page 319

Page: 319 / 602

Phone Mode (if equipped)

Making a call using the Steering

wheel controls

❈

The actual features in the vehicle

may differ from the illustration.

1. Mutes audio volume.
2. Press the button to change audio

source.

(With RDS)

FM1 FM2 FMA AM AMA

CD USB(iPod

) AUX My

Music BT Audio.

(Without RDS)

FM1

FM2

USB(iPod

) AUX My Music

BT Audio.

3. Used to control volume.

4. (if equipped)

When pressed shortly

- Starts voice recognition
- When selecting during a voice

prompt, stops the prompt and

converts to voice command

waiting state

When pressed and held

- Ends voice recognition

5. When pressed shortly

- When pressed in the phone

screen, displays call history

screen

- When pressed in the dial screen,

makes a call

- When pressed in the incoming

call screen, answers the call

- When pressed during call wait‐

ing, switches to waiting call (Call

Waiting)

When pressed and held

- When pressed in the

Bluetooth

Wireless Technology Handsfree

wait mode, redials the last call

- When pressed during a

Blue‐

tooth

Wireless

Technology

Handsfree call, switches call back

to mobile phone (Private)

- When pressed while calling on

the mobile phone, switches call

back to

Bluetooth

Wireless

Technology Handsfree (Operates

only when

Bluetooth

Wireless

Technology Handsfree is connec‐

ted)

6. Ends phone call

Bluetooth

Wireless Technology

(Type B-1)

When No Devices have been Paired

1. Press the [PHONE] button or the

[CALL] button on the steering

wheel controls. The following

screen is displayed.

5-79

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 319 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: