Kia CERATO 2018 Owner'S Manual Download Page 308

Page: 308 / 602

Auto Store
Press the [Auto store] button to auto‐

matically save receivable frequencies to

Preset buttons.

Scan
Press the [SCAN] button to preview fre‐

quencies with superior reception for 5

seconds each.

Press and hold the [SCAN] button to

preview presets for 5 seconds each.

Once scan is complete, the previous

frequency will be restored.

While Scan is operating, pressing the

[SCAN] button will cancel scanning.

Media Mode

Media Mode Screen

Pressing the [MEDIA] button will change

the operating mode in order of CD

USB(iPod

) AUX My Music BT

Audio.

If [Pop-up Mode]/[Mode Pop-up] is

turned on within [SETUP] [Display],

then pressing the [MEDIA] button will

display the Media Pop-up Mode screen.

Turn the TUNE knob to move the focus.

Press the knob to select.

The media mode pop up screen can be

displayed only when there are two or

more media modes turned on.

Mode Display on the Status Bar

When a

Bluetooth

Wireless Technolo‐

gy, iPod

, USB or AUX device is connec‐

ted or a CD is inserted, the correspond‐

ing mode icon will be displayed.

Icon

Title

Bluetooth

Wireless Technolo‐

gy
CD

iPod

USB

AUX

Audio system

5-68

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 308 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: