Kia CERATO 2018 Owner'S Manual Download Page 307

Page: 307 / 602

Radio Mode (Type B-3, Type

B-4)

Radio Mode Display Controls

1. Mode Display

Displays currently operating mode.

2. Frequency

Displays the current frequency.

3. Preset

Displays current preset number [1]

~ [6].

4. Preset Display

Displays preset buttons.

5. Auto store

Automatically saves frequencies

with superior reception to Preset

buttons.

With the Radio Mode Button

Pressing the [RADIO] button will change

the operating mode in order of FM1

FM2 AM.

If [Pop-up Mode] is turned on within

[SETUP] [Display], then pressing the

[RADIO] button will display the Radio

Pop-up Mode screen.

Turn the TUNE knob to move the focus.

Press the knob to select.

SEEK
Press the [SEEK TRACK] button to play

the previous/next frequency.

TUNE
Turn the TUNE knob to select the de‐

sired frequency.

Selecting/Saving Presets

Press the [Preset] button to display the

broadcast information for the frequen‐

cy saved to each button.

Press the [1] ~ [6] buttons to play the

desired preset.

While listening to a frequency you want

to save as a preset, press and hold one

of the [1] ~ [6] preset buttons to save

the current frequency to the selected

preset.

5-67

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 307 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: