Kia CERATO 2018 Owner'S Manual Download Page 294

Page: 294 / 602

9. SCAN

• Radio mode : previews all receiva‐

ble broadcasts for 5 seconds

each.

• CD, USB, My Music mode : pre‐

views each song (file) for 10 sec‐

onds each.

10. SETUP

• Changes to Setup mode.

11. TUNE knob

• Radio mode : turn to change

broadcast frequencies.

• CD, USB, iPod

, My Music mode :

turn to search tracks/channels/

files.

12. FOLDER

• MP3 CD/USB mode : Folder

13. FM

• Each time the button is pressed,

the mode is changed in order of

FM1 FM2.

14. AM

• Each time the button is pressed,

the mode is changed in order of

AM.

Before using the audio system

NOTICE

Using Compact Discs

• This device has been manufac‐

tured to be compatible with soft‐

ware bearing the following logo

marks.

• Do not clean discs with chemical

solutions, such as record sprays,

antistatic sprays, antistatic liquids,

benzene, or thinners.

• After using a disc, put the disc

back in its original case to prevent

disc scratches.

• Hold discs by their edges or within

the center hole to prevent damage

to disc surfaces.

• Do not introduce foreign substan‐

ces into the disc insert/eject slot.

Introducing foreign substances

could damage the device interior.

(Continued)

Audio system

5-54

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 294 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: