Kia CERATO 2018 Owner'S Manual Download Page 293

Page: 293 / 602

Feature of your audio

1. EJECT

• Ejects the disc.

2. RADIO

• Changes to FM/AM mode.
• Each time the button is pressed,

the mode is changed in the order

of FM1 FM2 AM.

3. MEDIA

• Changes

CD/

USB(iPod

)/AUX/My Music/Blue‐

tooth

Audio mode.

• Each time the button is pressed,

the mode is changed in the order

of CD, USB(iPod

), AUX, My Mu‐

sic, BT(Bluetooth

) Audio.

4. PHONE

• Changes to Phone mode.
• When a phone is not connected,

the connection screen is dis‐

played.

5. POWER/VOL knob

• Power knob : Turns power On/Off

by pressing the knob

• Volume knob : Sets volume by

turning the knob left/right

6. SEEK TRACK

When pressed briefly

• Radio mode : plays previous/next

frequency.

• CD, USB, iPod

, My Music, BT Au‐

dio mode : changes the track,

Song(file).

When pressed and held

• Radio

mode

continuously

changes the frequency. Upon re‐

lease, plays the current frequen‐

cy.

• CD, USB, iPod

, My Music mode :

rewinds or fast forwards the

track or file.

• During a Handsfree call, controls

the call volume.

7. DISP

• Each time the button is shortly

pressed, sets Screen Off

Screen On Screen Off

• Audio operation is maintained

and only the screen will be turned

Off.

• In the Screen Off state, press any

button to turn the Screen On

again.

8. MUTE

• When the button is pressed,

stops sound and Audio Mute is

displayed on LCD.

5-53

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 293 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: