Kia CERATO 2018 Owner'S Manual Download Page 285

Page: 285 / 602

Speed Dependent Volume Control
This feature is used to automatically

control the volume level according to

the speed of the vehicle.

Select [Speed Dependent Vol.]

Set

[Off/On]

With the Phone Button (if

equipped)

Press the [SETUP] button

Select

[Phone]

Pair Phone
Select [Pair Phone]

CAUTION

To pair a Bluetooth

Wireless Tech‐

nology enabled mobile phone, au‐

thentication and connection process‐

es are first required. As a result, you

cannot pair your mobile phone while

driving the vehicle. First park your

vehicle before use.

1. Search for device names as dis‐

played on your mobile phone and

connect.

❈

SSP : Secure Simple Pairing

Non SSP supported device :

2. After a few moments, a screen is

displayed where the passkey is en‐

tered.

Enter the passkey 0000 to pair

your

Bluetooth

Wireless Technolo‐

gy device with the car audio sys‐

tem.

SSP supported device :

3. After a few moments, a screen is

displayed 6 digits passkey.

Check the passkey on your

Blue‐

tooth

Wireless Technology device

and confirm.

The device name and passkey will

be displayed on the screen for up

to 3 minutes. If pairing is not com‐

pleted within the 3 minutes, the

mobile phone pairing process will

automatically be canceled.

5-45

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 285 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: