Kia CERATO 2018 Owner'S Manual Download Page 284

Page: 284 / 602

Setup Mode (Type A-3, Type

A-4)

With the Display Button

Press the [SETUP] button

Select

[Display]

Mode Pop up
[Mode Pop up] Changes [On] selec‐

tion mode

• During On state, press the [RADIO] or

[MEDIA] button to display the mode

change pop up screen.

Text Scroll
[Text Scroll] Set [On/Off]

• [On] : Maintains scroll

• [Off] : Scrolls only one (1) time.

Media Display

When playing an MP3 file, select the

desired display info from Folder/File or

Album/Artist/Song .

With the Sound Button

Press the [SETUP] button

Select

[Sound]

Sound Settings

This menu allows you to set the Bass,

Middle, Treble and the Sound Fader and

Balance.

Select [Sound Settings] Select menu

• Return : While adjusting values, re‐

pressing the TUNE knob will restore

the parent menu.

• Bass, Middle, Treble : Selects the

sound tone.

• Fader, Balance : Moves the sound

fader and balance.

• Default : Restores default settings.

Audio system

5-44

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 284 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: