Kia CERATO 2018 Owner'S Manual Download Page 25

Page: 25 / 602

(Continued)

• If there are occupants in the rear

seats, be careful while adjusting

the front seat position.

• Use extreme caution when picking

small objects trapped under the

seats or between the seat and the

center console. Your hands might

be cut or injured by the sharp

edges of the seat mechanism.

Front seat adjustment - manual

Forward and backward

To move the seat forward or backward:

1. Pull the seat slide adjustment lever

up and hold it.

2. Slide the seat to the position you

desire.

3. Release the lever and make sure

the seat is locked in place.

Adjust the seat before driving, and

make sure the seat is locked securely

by trying to move forward and back‐

ward without using the lever. If the

seat moves, it is not locked properly.

Seatback angle

To recline the seatback:

1. Lean forward slightly and lift up

the seatback recline lever.

2. Carefully lean back on the seat and

adjust the seatback of the seat to

the position you desire.

3. Release the lever and make sure

the seatback is locked in place. (The

lever MUST return to its original

position for the seatback to lock.)

Seat height (for driver’s seat)

To change the height of the seat, push

the lever upwards or downwards.

• To lower the seat cushion, push the

lever down several times.

• To raise the seat cushion, pull the lev‐

er up several times.

3-05

Safety featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 25 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: