manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 237 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 237

Icy road warning light (if

equipped)

This warning light is to warn the driver

the road may be icy when:

• Ignition ON
• Temperature  range:  approximately

below 4°C (39.2°F).

This  warning  light  blinks  10  times  and

then  illuminates,  and  also  warning

chime sounds 3 times:

NOTICE

If the icy road warning light appears

while driving, you should drive more

attentively  and  safely  refraining

from  over-speeding,  rapid  accelera‐

tion,  sudden  braking  or  sharp  turn‐

ing, etc.

Clothes hanger (if equipped)

❈

This actual feature may differ from

the illustration.

To use the hanger, pull down the upper

portion of hanger.

CAUTION

Do  not  hang  heavy  clothes,  since

those may damage the hook.

WARNING

Do  not  hang  other  objects  such  as

hangers  or  hard  objects  except

clothes.  Also,  do  not  put  heavy,

sharp  or  breakable  objects  in  the

clothe  pockets.  In  an  accident  or

when  the  curtain  air  bag  is  inflated,

it may cause vehicle damage or per‐

sonal injury.

 

 

4-145

4

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments