Kia CERATO 2018 Owner'S Manual Download Page 215

Page: 215 / 602

NOTICE

Never place anything over the sen‐

sor located on the instrument panel

to ensure better control of the heat‐

ing and cooling system.

Manual heating and air

conditioning

The heating and cooling system can be

controlled manually by pressing but‐

tons other than the AUTO button. In

this case, the system works sequential‐

ly according to the order of buttons se‐

lected.

1. Start the engine.

2. Set the mode to the desired posi‐

tion.

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system on.

Press the AUTO button in order to con‐

vert to full automatic control of the

system.

Mode selection

The mode selection button controls the

direction of the air flow through the

ventilation system.

The air flow outlet port is converted as

follows:

Refer to the illustration in the Manual

climate control system on page 4-112.

Face-Level

4-123

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 215 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: