Kia CERATO 2018 Owner'S Manual Download Page 199

Page: 199 / 602

INTERIOR LIGHT

CAUTION

Do not use the interior lights for ex‐

tended periods when the engine is

not running.

It may cause battery discharge.

WARNING

Do not use the interior lights when

driving in the dark. Accidents could

happen because the view may be

obscured by interior lights.

Automatic turn off function (if

equipped)

The interior lights automatically turn

off approximately 20 minutes after the

ignition switch is turned off.

If your vehicle is equipped with the

theft alarm system, the interior lights

automatically turns off approximately

5 seconds after the system is armed

stage.

Map lamp (if equipped)

Push the lens (1) to turn the map lamp

on or off. This light produces a spot

beam for convenient use as a map lamp

at night or as a personal lamp for the

driver and the front passenger.

• DOOR (2) :

In the DOOR position, the map lamp

and the room lamp come on when

any door is opened regardless of the

ignition switch position.

When doors are unlocked by the

transmitter (or smart key), the map

lamp and the room lamp come on for

approximately 30 seconds as long as

any door is not open. The map lamp

and the room lamp goes out gradual‐

ly after approximately 30 seconds if

the door is closed. However, if the ig‐

nition switch is ON or all doors are

locked, the map lamp and the room

lamp will turn off immediately.

• ON (4) :

Map lamp and room lamp stay on at

all times.

• OFF (3) :

The lights turn off even if a door is

opened.

❈

When the lamp is turned ON by

pressing the lens (1), the lamp does

not turn off even if the switch is in

the OFF position (3).

4-107

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 199 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: