Kia CERATO 2018 Owner'S Manual Download Page 191

Page: 191 / 602

CAUTION

• Never place anything over the sen‐

sor (1) located on the instrument

panel. This will ensure better au‐

to-light system control.

• Don’t clean the sensor using a win‐

dow cleaner. The cleaner may

leave a light film which could inter‐

fere with sensor operation.

• If your vehicle has window tint or

other types of metallic coating on

the front windshield, the Auto

light system may not work prop‐

erly.

High beam operation

To turn on the high beam headlights,

push the lever away from you. Pull it

back for low beams.

The high beam indicator will light when

the headlight high beams are switched

on.

To prevent the battery from being dis‐

charged, do not leave the lights on for a

prolonged time while the engine is not

running.

WARNING

Do not use high beam when there

are other vehicles. Using high beam

could obstruct the other driver’s vi‐

sion.

To flash the headlights, pull the lever

towards you. It will return to the nor‐

mal (low beam) position when released.

The headlight switch does not need to

be on to use this flashing feature.

4-99

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 191 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: