Kia CERATO 2018 Owner'S Manual Download Page 189

Page: 189 / 602

LIGHTING

Battery saver function

• The purpose of this feature is to pre‐

vent the battery from being dis‐

charged. The system automatically

turns off the parking lights when the

driver removes the ignition key and

opens the driver-side door.

• With this feature, the parking lights

will turn off automatically if the driv‐

er parks on the side of the road at

night.

If necessary, to keep the lights on

when the ignition key is removed,

perform the following:

1. Open the driver-side door.
2. Turn the parking lights OFF and ON

again using the light switch on the

steering column.

CAUTION

If the driver gets out of the vehicle

through other doors (except driver's

door), the battery saver function

does not operate. Therefore, It cau‐

ses the battery to be discharged. In

this case, make sure to turn off the

lamp before getting out of the vehi‐

cle.

Headlight escort function (if

equipped)

If you turn the ignition switch to the

ACC or OFF position with the headlights

ON, the headlights remain on for about

5 minutes. However, if the driver's door

is opened and closed, the headlights are

turned off after 15 seconds.

The headlights can be turned off by

pressing the lock button on the trans‐

mitter (or smart key) twice or turning

the light switch to the OFF position.

❈

Traffic Change (For Europe)

The low beam light distribution is

asymmetric. If you go abroad to a

country with opposite traffic direc‐

tion, this asymmetric part will daz‐

zle oncoming car driver. To prevent

dazzle, ECE regulation demand sev‐

eral technical solutions (ex. auto‐

matic change system, adhesive

sheet, down aiming). This head‐

lamps are designed not to dazzle

opposite drivers. So, you need not

change your headlamps in a coun‐

try with opposite traffic direction.

Lighting control

The light switch has a Headlight and a

Parking light position.

To operate the lights, turn the knob at

the end of the control lever to one of

the following positions:

1. OFF position
2. Position light position
3. Headlight position
4. Auto light position (if equipped)

4-97

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 189 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: