Kia CERATO 2018 Owner'S Manual Download Page 171

Page: 171 / 602

WARNING AND INDICATOR LIGHTS

Warning lights

NOTICE

Warning lights

Make sure that all warning lights are

OFF after starting the engine. If any

light is still ON, this indicates a situa‐

tion that needs attention.

Air bag warning light

This warning light illumi‐

nates:

• Once you set the ignition

switch or Engine Start/Stop Button

to the ON position.

- It illuminates for approximately

6 seconds and then goes off.

• When there is a malfunction with the

SRS.

In this case, have the vehicle inspec‐

ted by a professional workshop. Kia

recommends to visit an authorized

Kia dealer/service partner.

Seat belt warning light

This warning light informs

the driver that the seat belt

is not fastened.

❈

For more details, refer to Seat

belts on page 3-19.

Parking brake & brake

fluid warning light

This warning light illumi‐

nates:

• Once you set the Engine Start/Stop

Button to the ON position.

- It illuminates for approximately

3 seconds

- It remains on if the parking brake

is applied.

• When the parking brake is applied.
• When the brake fluid level in the res‐

ervoir is low.

- If the warning light illuminates

with the parking brake released, it

indicates the brake fluid level in

reservoir is low.

If the brake fluid level in the reservoir is

low:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check the

brake fluid level immediately and

add fluid as required (For more de‐

tails, refer to Brake fluid on page

8-31). Then check all brake com‐

ponents for fluid leaks. If any leak

on the brake system is still found,

the warning light remains on, or the

brakes do not operate properly, do

not drive the vehicle.

In this case, have the vehicle towed

to a professional workshop and in‐

spected. Kia recommends to visit

an authorized Kia dealer/service

partner.

Dual-diagonal braking system
Your vehicle is equipped with dual-diag‐

onal braking systems. This means you

still have braking on two wheels even if

one of the dual systems should fail.

With only one of the dual systems

working, more than normal pedal travel

and greater pedal pressure are required

to stop the vehicle.

Also, the vehicle will not stop in as

short a distance with only a portion of

the brake system working.

If the brakes fail while you are driving,

shift to a lower gear for additional en‐

gine braking and stop the vehicle as

soon as it is safe to do so.

4-79

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 171 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: