manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 131 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 131

Sliding the sunroof

To  open  or  close  the  sunroof  (manual

slide  feature),  pull  or  push  the  sunroof

control  lever  backward  or  forward  to

the first detent position.

To  open  the  sunroof  (autoslide  fea‐

ture),  press  the  sunroof  control  switch

backward  to  the  second  detent  posi‐

tion.

The  sunroof  will  slide  to  the  recom‐

mended open position (about 5 cm be‐

fore the maximum slide open position).

To stop the sunroof sliding at any point,

pull or push the sunroof control switch

momentarily.

To  open  the  sunroof  to  the  maximum

slide open position, press the switch to‐

wards  the  rear  of  the  vehicle  once

again and hold it until the sunroof slide

all the way open.

NOTICE

To  reduce  wind  noise  while  driving,

we  recommend  you  to  drive  at  the

recommended  position  (about  5  cm

before  the  maximum  slide  open  po‐

sition).

To  close  the  sunroof  (autoslide  fea‐

ture),  move  the  sunroof  control  switch

forward to the second detent position.

The  sunroof  will  close  all  the  way.  To

stop  the  sunroof  sliding  at  any  point,

pull or push the sunroof control switch

momentarily.

Automatic reversal

If  an  object  or  part  of  the  body  is  de‐

tected  while  the  sunroof  is  closing  au‐

tomatically, it will reverse direction, and

then stop.

The  auto  reverse  function  does  not

work if a small obstacle is between the

sliding glass and the sunroof sash. You

should always check that all passengers

and objects are away from the sunroof

before closing it.

Objects  less  than  0.16  inch  (4  mm)  in

diameter  caught  between  the  sunroof

glass  and  the  front  glass  channel  may

not  be  detected  by  the  automatic  re‐

verse  glass  and  the  glass  will  not  stop

and reverse direction.

 

 

4-39

4

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments