manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 125 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 125

HOOD

Opening the hood

1. Pull the release lever to unlatch the

hood.  The  hood  should  pop  open

slightly.

WARNING

Open the hood after turning off the

engine on a flat surface, shifting the

shift  lever  to  the  P  (Park)  position

for automatic transaxle / dual clutch

transmission  and  to  the  1st  (First)

gear  or  R  (Reverse)  for  manual

transaxle,  and  setting  the  parking

brake.

2. Go to the front of the vehicle, raise

the  hood  slightly,  push  the  secon‐

dary latch left side (1) inside of the

hood center and lift the hood (2).

3. Pull out the support rod.

4. Hold the hood opened with the sup‐

port rod.

WARNING

n

Hot parts

Be very careful not to touch the sup‐

port  rod  when  the  engine  and  parts

are hot. You could get burned or get

seriously injured.

Closing the hood

1. Before  closing  the  hood,  check  the

following:

• All  filler  caps  in  the  engine  com‐

partment  must  be  correctly  in‐

stalled.

• Gloves,  rags  or  any  other  com‐

bustible  material  must  be  re‐

moved from the engine compart‐

ment.

2. Return the support rod to its clip to

prevent it from rattling.

3. Lower  the  hood  until  it  is  about

30  cm  above  the  closed  position

and  let  it  drop.  Make  sure  that  it

locks into place.

 

 

4-33

4

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments