Kia CERATO 2018 Owner'S Manual Download Page 12

Page: 12 / 602

VEHICLE BREAK-IN PROCESS

No special break-in period is needed. By

following a few simple precautions for

the first 1,000 km (600 miles) you may

add to the performance, economy and

life of your vehicle.

• Do not race the engine.
• While driving, keep your engine speed

(rpm, or revolutions per minute)

within 3,000 rpm.

• Do not maintain a single speed for

long periods of time, either fast or

slow. Varying engine speed is needed

to properly break-in the engine.

• Avoid hard stops, except in emergen‐

cies, to allow the brakes to seat

properly.

• Don't tow a trailer during the first

2,000 km (1,200 miles) of operation.

Introduction

1-06

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 12 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: