Kia CERATO 2018 Owner'S Manual Download Page 503

Page: 503 / 602

CAUTION

• Warm tires normally exceed rec‐

ommended cold tire pressures by

28 to 41 kPa (4 to 6 psi). Do not

release air from warm tires to ad‐

just the pressure or the tires will

be underinflated.

• Be sure to reinstall the tire infla‐

tion valve caps. Without the valve

cap, dirt or moisture could get into

the valve core and cause air leak‐

age. If a valve cap is missing, in‐

stall a new one as soon as possi‐

ble.

WARNING

Tire Inflation

Overinflation or underinflation can

reduce tire life, adversely affect ve‐

hicle handling, and lead to sudden

tire failure. This could result in loss

of vehicle control and potential in‐

jury.

CAUTION

Tire pressure

Always observe the following:

• Check tire pressure when the tires

are cold. (After vehicle has been

parked for at least three hours or

hasn't been driven more than

1.6 km (one mile) since startup.)

• Check the pressure of your spare

tire each time you check the pres‐

sure of other tires.

• Never overload your vehicle. Be

careful not to overload a vehicle

luggage rack if your vehicle is

equipped with one.

• Worn, old tires can cause acci‐

dents. If your tread is badly worn,

or if your tires have been dam‐

aged, replace them.

Checking tire inflation pressure

Check your tires once a month or more.

Also, check the tire pressure of the

spare tire.

How to check

Use a good quality gauge to check tire

pressure. You can not tell if your tires

are properly inflated simply by looking

at them. Radial tires may look properly

inflated even when they're underinfla‐

ted.

Check the tire's inflation pressure when

the tires are cold. - "Cold" means your

vehicle has been sitting for at least

three hours or driven no more than

1.6 km (1 mile).

Remove the valve cap from the tire

valve stem. Press the tire gauge firmly

onto the valve to get a pressure meas‐

urement. If the cold tire inflation pres‐

sure matches the recommended pres‐

sure on the tire and loading information

label, no further adjustment is necessa‐

ry. If the pressure is low, add air until

you reach the recommended amount.

If you overfill the tire, release air by

pushing on the metal stem in the cen‐

ter of the tire valve. Recheck the tire

pressure with the tire gauge. Be sure to

put the valve caps back on the valve

stems. They help prevent leaks by

keeping out dirt and moisture.

8-45

Maintenance

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 503 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: