Kia CERATO 2018 Owner'S Manual Download Page 495

Page: 495 / 602

WIPER BLADES

Blade inspection

NOTICE

Commercial hot waxes applied by

automatic car washes have been

known to make the windshield diffi‐

cult to clean.

Contamination of either the windshield

or the wiper blades with foreign matter

can reduce the effectiveness of the

windshield wipers. Common sources of

contamination are insects, tree sap,

and hot wax treatments used by some

commercial car washes. If the blades

are not wiping properly, clean both the

window and the blades with a good

cleaner or mild detergent, and rinse

thoroughly with clean water.

CAUTION

To prevent damage to the wiper

blades, do not use gasoline, kero‐

sene, paint thinner, or other solvents

on or near them.

Blade replacement

When the wipers no longer clean ade‐

quately, the blades may be worn or

cracked, and require replacement.

CAUTION

To prevent damage to the wiper

arms or other components, do not
(Continued)

(Continued)

attempt to move the wipers man‐

ually.

CAUTION

The use of a non-specified wiper

blade could result in wiper malfunc‐

tion and failure.

Front windshield wiper blade

Type A

1. Raise the wiper arm.

8-37

Maintenance

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 495 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: