Home
/
Kia
/
CERATO 2018
/
Owner'S Manual

Kia CERATO 2018, Owner'S Manual, Page: 467 / 602

Share

Page: 467 / 602

Kia CERATO 2018 Owner'S Manual Download Page 467

SCHEDULED MAINTENANCE SERVICE

Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any

of the following conditions apply, follow the Maintenance Under Severe Usage Conditions.

• Repeated driving short distance of less than 8 km (5 miles) in normal temperature or less than 16 km (10 miles) in freezing

temperature.

• Extensive engine idling or low speed driving for long distances
• Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads
• Driving in areas using salt or other corrosive materials or in very cold weather
• Driving in heavy dust condition
• Driving in heavy traffic area
• Driving on uphill, downhill, or mountain road repeatedly
• Towing a trailer or using a camper, or roof rack
• Driving as a patrol car, taxi, other commercial use of vehicle towing
• Driving over 170 km/h (106 mile/h).
• Frequently driving in stop-and-go condition.

If your vehicle is operated under the above conditions, you should inspect, replace or refill more frequently than the following

Normal Maintenance Schedule. After the periods or distance shown in the chart, continue to follow the prescribed mainte‐

nance intervals.

8-09

8

Maintenance

«
...
465
466
467
468
469
...
»

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments