manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 454 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 454

Removable towing hook (if

equipped)

1. Open the trunk lid, and remove the

towing hook from the tool case.

2. Remove the hole cover pressing the

lower  part  of  the  cover  on  the

bumper.

3. Install the towing hook by turning it

clockwise  into  the  hole  until  it  is

fully secured.

4. Remove the towing hook and install

the cover after use.

Emergency towing

If  towing  is  necessary,  we  recommend

you  to  have  it  done  by  an  authorized

Kia  dealer  or  a  commercial  tow  truck

service.

If  towing  service  is  not  available  in  an

emergency,  your  vehicle  may  be  tem‐

porarily  towed  using  a  cable  or  chain

secured to the emergency towing hook

under the front (or rear) of the vehicle.

Use  extreme  caution  when  towing  the

vehicle.  A  driver  must  be  in  the  vehicle

to steer it and operate the brakes.

Towing in this manner may be done on‐

ly  on  hard-surfaced  roads  for  a  short

distance  and  at  low  speed.  Also,  the

wheels, axles, power train, steering and

brakes must all be in good condition.

What to do in an emergency

 

 

7-22

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments