Kia CERATO 2018 Owner'S Manual Download Page 449

Page: 449 / 602

If you have a tire gauge, remove the

valve cap and check the air pressure. If

the pressure is lower than recommen‐

ded, drive slowly to the nearest service

station and inflate to the correct pres‐

sure. If it is too high, adjust it until it is

correct. Always reinstall the valve cap

after checking or adjusting tire pres‐

sure. If the cap is not replaced, air may

leak from the tire. If you lose a valve

cap, buy another and install it as soon

as possible.

After you have changed wheels, always

secure the flat tire in its place and re‐

turn the jack and tools to their proper

storage locations.

CAUTION

Your vehicle has metric threads on

the wheel studs and nuts. Make cer‐

tain during wheel removal that the

same nuts that were removed are

reinstalled - or, if replaced, that nuts

with metric threads and the same

chamfer configuration are used. In‐

stallation of a non-metric thread nut

on a metric stud or vice-versa will

not secure the wheel to the hub

properly and will damage the stud so

that it must be replaced.
(Continued)

(Continued)

Note that most lug nuts do not have

metric threads. Be sure to use ex‐

treme care in checking for thread

style before installing aftermarket

lug nuts or wheels. If in doubt, con‐

sult a professional workshop. Kia

recommends to consult an author‐

ized Kia dealer/service partner.

WARNING

Wheel studs

If the studs are damaged, they may

lose their ability to retain the wheel.

This could lead to the loss of the

wheel and a collision resulting in se‐

rious injuries.

To prevent the jack, jack handle, wheel

lug nut wrench and spare tire from rat‐

tling while the vehicle is in motion,

store them properly.

WARNING

Inadequate spare tire pressure

Check the inflation pressures as

soon as possible after installing the

spare tire. Adjust it to the specified

pressure, if necessary. Refer to

Tires and wheels on page 9-08.

Important - use of compact spare

tire (if equipped)

Your vehicle is equipped with a compact

spare tire. This compact spare tire

takes up less space than a regular- size

tire. This tire is smaller than a conven‐

tional tire and is designed for tempora‐

ry use only.

CAUTION

• You should drive carefully when

the compact spare is in use. The

compact spare should be replaced

by the proper conventional tire

and rim at the first opportunity.

(Continued)

7-17

What to do in an emer

gency

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 449 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: