Kia CERATO 2018 Owner'S Manual Download Page 413

Page: 413 / 602

If the vehicle has started at the same

time as the vehicle next to you and

has accelerated.

When the other vehicle passes at a

very fast speed.

While changing lanes.

When going down or up a steep, un‐

even road.

When the other vehicle approaches

very close.

When a trailer or carrier is installed.

When the temperature of the rear

bumper is very high or low.

When the sensors are blocked by

other vehicles, walls or parking-lot

pillars.

When the detected vehicle also

moves back, as your vehicle drives

back.

If there are small things like shopping

cart and baby carriage.

If there is low height vehicle like sport

vehicle.

When other vehicles are close to your

vehicle.

When the vehicle in the next lane

moves two lanes away from you OR

when the vehicle two lanes away

moves to the next lane from you.

When driving through a narrow road

with many plants.

When driving on wet surface.

6-59

Driving your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 413 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: