Kia CERATO 2018 Owner'S Manual Download Page 408

Page: 408 / 602

BLIND SPOT DETECTION SYSTEM (BSD) (IF EQUIPPED)

The BSD (Blind spot detection) system

uses a radar sensor to alert the driver

while driving.

It senses the rear side territory of the

vehicle and provides information to the

driver.

1. BSD (Blind spot detection)

Warning range is dependent on

your vehicle speed. However, if the

speed of your vehicle is faster by

10km/h or more than other nearby

vehicles, the warning is not operat‐

ed.

2. LCA (Lane change assist)

When vehicles are approaching to

your vehicle at high speed, the

warning is operated.

3. RCTA (Rear cross traffic alert)

When your vehicle moves back‐

ward, the sensor detects approach‐

ing vehicles to the left or right side

direction and warning is operated.

WARNING

• Always check the road condition

while driving for unexpected situa‐

tions even though the BSD (Blind

spot detection) system is operat‐

ing.

• BSD (Blind spot detection) system

is a system made for convenience.

Do not solely rely on the system

but always pay attention to drive

safely.

BSD (Blind Spot Detection) / LCA

(Lane Change Assist)

Operating conditions

The indicator on the switch will illumi‐

nate when the BSD (Blind spot detec‐

tion) / LCA (Lane Change Assist) sys‐

tem switch is pressed with the ignition

switch ON. If the vehicle speed exceeds

30 km/h (18.6 mph), the system will

activate.

If you press the switch again, the

switch indicator and system will be

turned off.

If the ignition switch is turned OFF and

ON the system returns to the previous

state.

Driving your vehicle

6-54

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 408 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: