manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 403 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 403

To increase cruise control set

speed:

Follow either of these procedures:

• Move the lever up (to RES+) and hold

it.  Your  vehicle  will  accelerate.  Re‐

lease  the  lever  at  the  speed  you

want.

• Move  the  lever  up  (to  RES+)  and  re‐

lease  it  immediately.  The  cruising

speed  will  increase  by  2.0  km/h  or

1 mph each time you move the lever

up (to RES+) in this manner.

To decrease the cruising speed:

Follow either of these procedures:

• Move  the  lever  down  (to  SET-)  and

hold  it.  Your  vehicle  will  gradually

slow  down.  Release  the  lever  at  the

speed you want to maintain.

• Move  the  lever  down  (to  SET-)  and

release  it  immediately.  The  cruising

speed  will  decrease  by  2.0  km/h  or

1 mph each time you move the lever

down (to SET-) in this manner.

To temporarily accelerate with

the cruise control on:

If  you  want  to  speed  up  temporarily

when  the  cruise  control  is  on,  depress

the  accelerator  pedal.  Increased  speed

will not interfere with cruise control op‐

eration or change the set speed.

To  return  to  the  set  speed,  take  your

foot off the accelerator pedal.

If  you  move  the  down  (to  SET-)  at  in‐

creased  speed,  the  cruising  speed  will

be set again.

To cancel cruise control, do one

of the following:

• Depress the brake pedal.

 

 

6-49

6

Driving your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments