Kia CERATO 2018 Owner'S Manual Download Page 401

Page: 401 / 602

CRUISE CONTROL SYSTEM (IF EQUIPPED)

1. Cruise indicator
2. Cruise set indicator

The cruise control system allows you to

program the vehicle to maintain a con‐

stant speed without depressing the ac‐

celerator pedal.

This system is designed to function

above approximately 30 km/h .

WARNING

• If the cruise control is left on,

(CRUISE indicator light in the in‐

strument cluster is illuminated),

the cruise control can be switched

on accidentally. Keep the cruise

control system off (CRUISE indica‐

tor light OFF) when the cruise con‐

trol is not in use, to avoid inadver‐

tently setting a speed.

• Use the cruise control system only

when driving on open highways in

good weather.

• Do not use the cruise control when

it may not be safe to keep the ve‐

hicle at a constant speed, for in‐

stance, driving in heavy or varying

traffic, or on slippery (rainy, icy or

snow-covered) or winding roads or

over 6% up-hill or down-hill roads.

• Pay particular attention to the

driving conditions whenever using

the cruise control system.

• Be careful when driving downhill

using the cruise control system,

which may increase the vehicle

speed.

CAUTION

During cruise-speed driving with a

manual transaxle vehicle, do not

shift into neutral without depressing

the clutch pedal, since the engine

will be over-revved. If this happens,

depress the clutch pedal or release

the CRUISE switch.

NOTICE

• During normal cruise control oper‐

ation, when the SET switch is acti‐

vated or reactivated after applying

the brakes, the cruise control will

energize

after

approximately

3 seconds. This delay is normal.

• To activate cruise control, depress

the brake pedal at least once after

turning the ignition switch to the

ON position or starting the engine.

This is to check if the brake switch

which is important part to cancel

cruise control is in normal condi‐

tion.

6-47

Driving your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 401 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: