Kia CERATO 2018 Owner'S Manual Download Page 395

Page: 395 / 602

• Press the ESC OFF but‐

ton for at least half a

second after turning the

ignition ON to turn ESC

off. (ESC OFF indicator

will illuminate). To turn

the ESC on, press the

ESC OFF button (ESC

OFF indicator light will

go off).

• When starting the en‐

gine, you may hear a

slight ticking sound. This

is the ESC performing

an automatic system

self-check and does not

indicate a problem.

When operating

When the ESC is in opera‐

tion, the ESC indicator light

blinks.

When the Electronic Stabili‐

ty Control is operating

properly, you can feel a

slight pulsation in the vehi‐

cle. This is only the effect

of brake control and indi‐

cates nothing unusual.

When moving out of the

mud or slippery road,

pressing the accelerator

pedal may not cause the

engine rpm (revolutions per

minute) to increase.

ESC operation off

ESC OFF state

This car has 2 kinds of ESC

off states.

If the engine stops when ESC

is off, ESC remains off. Upon

restarting the engine, the ESC

will automatically turn on

again.

• ESC off state 1

To cancel the ESC operation, press

the ESC OFF button (ESC OFF

)

once. Then, the ESC OFF indicator

light (ESC OFF ) will illuminate and

the warning message "Traction Con‐

trol disabled" will appear in the LCD

window. At this state, the engine

control function does not operate. It

means the traction control function

does not operate. Brake control func‐

tion only operates.

• ESC off state 2

To cancel the ESC operation, press

the ESC OFF button (ESC OFF

)

once. Then, the ESC OFF indicator

light (ESC OFF

) will illuminate ,

warning chime will sound and the

warning message "Traction & Stabili‐

ty Control disabled" will appear in the

LCD window.

At this state, the engine control func‐

tion and brake control function do not

operate. It means the car stability

control function does not operate any

more.

6-41

Driving your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 395 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: