Kia CERATO 2018 Owner'S Manual Download Page 387

Page: 387 / 602

Shift-lock override

If the shift lever cannot be moved from

the P (Park) position into R (Reverse)

position with the brake pedal de‐

pressed, continue depressing the brake,

then do the following:

1. Place the ignition switch in the

LOCK/OFF position.

2. Apply the parking brake.
3. Carefully remove the cap (1) cover‐

ing the shift-lock release access

hole.

4. Insert a tool (e.g. flathead screw‐

driver) into the access hole and

press down on the tool.

5. Move the shift lever.

6. Remove the tool from the shiftlock

override access hole then install the

cap.

7. Have the system inspected by a

professional workshop. Kia recom‐

mends to visit an authorized Kia

dealer/service partner.

Ignition key interlock system (if

equipped)

The ignition key cannot be removed un‐

less the shift lever is in the P (Park) po‐

sition.

Good driving practices

• Never move the shift lever from P

(Park) or N (Neutral) to any other po‐

sition with the accelerator pedal de‐

pressed.

• Never move the shift lever into P

(Park) when the vehicle is in motion.

• Be sure the car is completely stopped

before you attempt to shift into R

(Reverse) or D (Drive).

• Never take the car out of gear and

coast down a hill. This may be ex‐

tremely hazardous. Always leave the

car in gear when moving.

• Do not "ride" the brakes. This can

cause them to overheat and malfunc‐

tion. Instead, when you are driving

down a long hill, slow down and shift

to a lower gear. When you do this,

engine braking will help slow the car.

• Slow down before shifting to a lower

gear. Otherwise, the lower gear may

not be engaged.

• Always use the parking brake. Do not

depend on placing the transaxle in P

(Park) to keep the car from moving.

• Exercise extreme caution when driv‐

ing on a slippery surface. Be especial‐

ly careful when braking, accelerating

or shifting gears. On a slippery sur‐

face, an abrupt change in vehicle

speed can cause the drive wheels to

lose traction and the vehicle to go out

of control.

• Optimum vehicle performance and

economy is obtained by smoothly de‐

pressing and releasing the accelera‐

tor pedal.

6-33

Driving your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 387 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: