Kia CERATO 2018 Owner'S Manual Download Page 382

Page: 382 / 602

• The Dual Clutch Transmission gives

the driving feel of a manual transmis‐

sion, yet provides the ease of a fully

automatic transmission. Unlike a tra‐

ditional automatic transmission, the

gear shifting can be felt (and heard)

on the dual clutch transmission

- Think of it as an automatically

shifting manual transmission.

- Shift into Drive range and get fully

automatic shifting, similar to a

conventional automatic transmis‐

sion.

• Dual clutch transmission adopts dry-

type dual clutch, which is different

from torque converter of automatic

transmission, and shows better ac‐

celeration performance during driv‐

ing. But, initial launch might be little

bit slower than Automatic Transmis‐

sion.

• The dry-type clutch transfers torque

and provides a direct driving feeling

which may feel different from a con‐

ventional automatic transmission

with a torque converter. This may be

more noticeable when starting from

a stop or low vehicle speed.

• When rapidly accelerating at low ve‐

hicle speed, engine could rev at high

rpm depending on vehicle drive condi‐

tion.

• For smooth launch uphill, press down

the accelerator pedal smoothly de‐

pending on the current conditions.

• If you release your foot from the ac‐

celerator pedal at low vehicle speed,

you may feel strong engine brake,

which is similar to manual transmis‐

sion.

• When driving downhill, you may use

Sports Mode and press the paddle

shifters to downshift to a lower gear

in order to control your speed with‐

out using the brake pedal excessively.

• When you turn the engine on and off,

you may hear clicking sounds as the

system goes through a self test. This

is a normal sound for the Dual Clutch

Transmission.

WARNING

Due to transmission failure, the ve‐

hicle may not move and the position

indicator (D,R) will blink on the clus‐

ter. In this case, have the system
(Continued)

(Continued)

checked by a professional workshop.

Kia recommends to visit an author‐

ized Kia dealer/service partner.

CAUTION

Using brakes on a steep grade

To hold the vehicle on a hill use the

foot or parking brake. If the vehicle

is held by applying the accelerator

pedal on a hill, the clutch and trans‐

mission will be overheated resulting

in damage. Then a time, a warning

message "Steep grade! Press brake

pedal" will appear on the LCD win‐

dow and you may feel a some vibra‐

tion.

CAUTION

Overheated Dual clutch trans‐

mission

If a vehicle on a steep grade is held

by using the accelerator pedal or re‐

peated kick down driving mecha‐
(Continued)

Driving your vehicle

6-28

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 382 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: