manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 37 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 37

5. To  use  the  rear  seat,  lift  and  pull

the  seatback  backward.  Pull  the

seatback  firmly  until  it  clicks  into

place.  Make  sure  the  seatback  is

locked in place.

6. Return  the  rear  seat  belt  to  the

proper position.

If  the  seat  belt  locks  after  unfolding

the rear seatback, pull out the locked

seat  belt,  release  it  then  pull  it  out

again.

• 5 door

1. Set  the  front  seatback  to  the  up‐

right  position  and  if  necessary,

slide the front seat forward.

2. Lower  the  rear  headrests  to  low‐

est position.

3. Pull  the  lock  release  lever  (1)  and

fold the rear seatback forward and

down firmly.

4. To  use  the  rear  seat,  lift  and  pull

the  seatback  backward.  Pull  the

seatback  firmly  until  it  clicks  into

place.  Make  sure  the  seatback  is

locked  in  place.  When  you  return

the  seatback  to  its  upright  posi‐

tion,  always  be  sure  it  has  locked

into position by pushing on the top

of the seatback.

If  you  can  not  see  the  red  line  at

the  folding  lever,  it  means  the

seatback is locked completely.

WARNING

After  folding  the  rear  seat,  unless

the  driver’s  position  is  properly  set

according to the driver’s physical fig‐

ure, do not fold the rear seat. It may

increase  body  injuries  in  a  sudden

stop or collision.

WARNING

n

Uprighting seat

(Continued)

(Continued)

When you return the seatback to its

upright  position,  hold  the  seatback

and  return  it  slowly.  If  the  seatback

is  returned  without  holding  it,  the

back  of  the  seat  could  spring  for‐

ward  resulting  in  injury  caused  by

being struck by the seatback.

WARNING

When  you  return  the  rear  seatback

to  its  upright  position  after  being

folded down:

Be  careful  not  to  damage  the  seat

belt webbing or buckle. Do not allow

the  seat  belt  webbing  or  buckle  to

get  caught  or  pinched  in  the  rear

seat.  Ensure  that  the  seatback  is

completely  locked  into  its  upright

position by pushing on the top of the

seatback.  Otherwise,  in  an  accident

or  sudden  stop,  the  seat  could  fold

down and allow cargo enter the pas‐

senger  compartment,  which  could

result in serious injury or death.

 

 

3-17

3

Safety featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments