Kia CERATO 2018 Owner'S Manual Download Page 343

Page: 343 / 602

CAUTION

Bluetooth

Wireless Technology au‐

dio streaming may not be supported

in some Bluetooth

Wireless Tech‐

nology phones.

With the System Button

Press the [SETUP] button

Select

[System]

You can select and control options rela‐

ted to [Memory Information], [Voice

Recognition System] and [Language].

Memory Information

This feature displays information rela‐

ted to system memory.

• Using : Displays capacity currently in

use

• Capacity : Displays total capacity

❈

May differ depending on the selec‐

ted audio.

Voice Recognition Mode Setting (if

equipped)

This feature is used to select the de‐

sired prompt feedback option from

Normal and Expert.

• Normal : When using voice recogni‐

tion, provides detailed guidance

prompts

• Expert : When using voice recognition,

omits some guidance prompts

Language

This feature is used to change the sys‐

tem and voice recognition language.

If the language is changed, the system

will restart and apply the selected lan‐

guage.

• Language support by region

Dansk, Deutsch, English(UK), Español,

Français,

Italiano,

Nederlands,

Pycc , Polski, Svenska, Türkçe

5-103

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 343 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: