Kia CERATO 2018 Owner'S Manual Download Page 340

Page: 340 / 602

SDVC (Speed Dependent Volume Con‐

trol)

The volume level is controlled automat‐

ically according to the vehicle speed.

SDVC can be set by selecting from On/

Off.

Volume Dialogue (if equipped)

Use the [-], [+] buttons to adjust the

Volume Dialog.

Touch Screen Beep

This feature is used to turn the touch

screen beep on/off.

With the Phone Button (if

equipped)

Press the [SETUP] button

Select

[Phone]

You can select and control options rela‐

ted to [Pair Phone], [Paired Phone List],

[Phone book Download], [Auto Down‐

load], [Outgoing Volume] and [Blue‐

tooth System Off].

Pairing a New Device

Bluetooth

Wireless Technology devices can be

paired with the audio system.

For more information, refer to the

Pairing through Phone Setup on page

5-80.

Audio system

5-100

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 340 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: