Kia CERATO 2018 Owner'S Manual Download Page 330

Page: 330 / 602

During a Handsfree Call

• Caller : Displays the other party s

name if the incoming caller is saved

within your contacts.

• Incoming Number : Displays the in‐

coming number.

• Call time : Displays the call time.
• End : Ends call.
• Private : Converts to Private mode.
• Out Vol. : Sets call volume as heard

by the other party.

• Mute : Turns Mic Mute On/Off.

NOTICE

If the mic is muted, the other party

will not be able to hear your voice.

Call History

A list of incoming, outgoing and missed

calls is displayed.

Press the [Download] button to down‐

load the call history.

• Call History :

- Displays recent calls (call history).
- Connects call upon selection.

• Download : Download Recent Call His‐

tory.

Contacts

The list of saved phone book entries is

displayed. Press the [Download] button

to download the call history.

• Contacts List :

- Displays downloaded contacts en‐

tries.

- Connects call upon selection.

• Download : Download contacts en‐

tries.

NOTICE

• Up to 1,000 contacts entries can

be copied into car contacts.

(Continued)

Audio system

5-90

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 330 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: