manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 316 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 316

• Type B-3, Type B-4

Press  the  [MEDIA]  button 

  Select

[AUX]

An external device can be connected to

play music.

Connecting an External Device
External audio players (Camcorders, car

VCR,  etc.)  can  be  played  through  a

dedicated cable.

If  an  external  device  connector  is  con‐

nected  with  the  AUX  terminal,  then

AUX  mode  will  automatically  operate.

Once the connector is disconnected, the

previous mode will be restored.

AUX  mode  can  be  used  only  when  an

external  audio  player  (camcorder,  car

VCR, etc.) has been connected.

The AUX volume can be controlled sep‐

arately from other audio modes.

Connecting a connector jack to the AUX

terminal without an external device will

convert  the  system  to  AUX  mode,  but

only  output  noise.  When  an  external

device  is  not  being  used,  also  remove

the connector jack.

When the external device power is con‐

nected  to  the  power  jack,  playing  the

external  device  may  output  noise.  In

such  cases,  disconnect  the  power  con‐

nection before use.

Fully  insert  the  AUX  cable  to  the  AUX

jack upon use.

MENU : My Music Mode

My Music Mode Display Controls

• Type B-1, Type B-2

• Type B-3, Type B-4

1. Mode

Displays currently operating mode.

2. Operation State

From 

Repeat/Random(Shuffle)/

Scan, displays the currently operat‐

ing function.

3. File Index

Displays the current file/total num‐

ber of files.

4. File Info

Displays information about the cur‐

rent file.

5. Play/Pause

Changes the play/pause state.

6. Play Time

Displays the current play time.

Audio system

 

 

5-76

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments