Kia CERATO 2018 Owner'S Manual Download Page 303

Page: 303 / 602

(Continued)

automatically connected. Even if
you are outside, the

Bluetooth

Wireless Technology phone will be

automatically connected once you

are in the vicinity of the vehicle. If

you do not want to automatically
connect your

Bluetooth

Wireless

Technology phone, try the follow‐

ing.

1. Turn off the

Bluetooth

Wire‐

less Technology feature in your

mobile phone.

2. Turn off the

Bluetooth

Wire‐

less Technology feature in your

car audio system.

- To turn off the

Bluetooth

Wireless Technology feature

in your car audio system, go

to [SETUP] > [Phone] and
[turn off] the

Bluetooth

Wireless Technology feature.

•

Bluetooth

Wireless Technology connection

may become intermittently dis‐

(Continued)

connected in some mobile phones.

Follow these steps to try again.

1. Turn the

Bluetooth

Wireless

Technology function within the

mobile phone off/on and try

again.

2. Turn the mobile phone power

Off/On and try again.

3. Completely remove the mobile

phone battery, reboot, and then

again.

4. Reboot the audio system and

try again.

5. Delete all paired devices, pair

and try again.

• It is possible to pair up to five

Bluetooth

Wireless Technology

devices to the car system.

• Phone contact names should be

saved in English or they may not

be displayed correctly.

• The Handsfree call volume and

quality may differ depending on

the mobile phone.

(Continued)

• Only one

Bluetooth

Wireless

Technology device can be connec‐

ted at a time.

• In some mobile phones, starting

the ignition while talking through

Bluetooth

Wireless Technology

enabled handsfree call will result in

the call becoming disconnected.

(Switch the call back to your mo‐

bile phone when starting the igni‐

tion.)

• If the mobile phone is not paired or

connected, it is not possible to en‐

ter Phone mode. Once a phone is

paired or connected, the guidance

screen will be displayed.

5-63

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 303 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: