Kia CERATO 2018 Owner'S Manual Download Page 291

Page: 291 / 602

• Radio mode

- Press the button : Previews

each broadcast for 5 seconds

each.

• CD, USB, My Music mode

- Press the button : Previews

each song (file) for 10 seconds

each.

- Press the button again to con‐

tinue listening to the current

song (file).

10. SETUP

• Changes to Setup mode.

11. TUNE knob

• Radio mode : turn to change

broadcast frequencies.

• CD, USB, iPod

, My Music mode:

turn to search tracks/channels/

files.

12. FOLDER

• MP3 CD/USB mode : Folder

13. FM

• Each time the button is pressed,

the mode is changed in order of

FM1 FM2 FMA.

14. AM

• Each time the button is pressed,

the mode is changed in order of

AM AMA.

5-51

Audio system

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 291 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: