Kia CERATO 2018 Owner'S Manual Download Page 258

Page: 258 / 602

(Continued)

• If you use devices such as a USB

hub purchased separately, the ve‐

hicle s audio system may not rec‐

ognize the USB device. In that

case, connect the USB device di‐

rectly to the multimedia terminal

of the vehicle.

• If the USB device is divided by logi‐

cal drives, only the music files on

the highest-priority drive are rec‐

ognized by car audio.

• Devices such as MP3 Player/ Cellu‐

lar phone/Digital camera can be

unrecognizable by standard USB

I/F.

• Charging through the USB may not

be supported in some mobile devi‐

ces.

• USB HDD or USB types liable to

connection failures due to vehicle

vibrations are not supported. (i-

stick type)

• Some non-standard USB devices

(METAL COVER TYPE USB) can be

unrecognizable.

(Continued)

• Some USB flash memory readers

(such as CF, SD, micro SD, etc.) or

external-HDD type devices can be

unrecognizable.

• Music files protected by DRM (DIG‐

ITAL RIGHTS MANAGEMENT) are

not recognizable.

• The data in the USB memory may

be lost while using this audio. Al‐

ways back up important data on a

personal storage device.

•

Please avoid using USB

memory products

which can be used as

key chains or cellular

phone accessories as

they could cause dam‐

age to the USB jack.

Please make certain only to use

plug type connector products.

NOTICE

Using the iPod

device

• Some iPod

models may not sup‐

port communication protocol and

files may not properly play.
Supported iPod

models :

- iPhone

3GS/4

- iPod

touch 1st~4th generation

- iPod

nano 1st~6th generation

- iPod

classic

• The order of search or playback of

songs in the iPod

can be different

from the order searched in the au‐

dio system.

• If the iPod

disabled due to its

own malfunction, reset the iPod

(Reset : Refer to iPod

manual)

• An iPod

may not operate normal‐

ly on low battery.

(Continued)

Audio system

5-18

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 258 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: