Kia CERATO 2018, Owner'S Manual, Page: 236 / 602

(Continued)
• Some electronic devices can cause
electronic interference when plug‐
ged into a vehicle’s power outlet.
These devices may cause exces‐
sive audio static and malfunctions
in other electronic systems or de‐
vices used in your vehicle.
• Make sure that the electric devices
are plugged in securely. If not, it
could cause a malfunction of elec‐
tric systems.
• If you use an electric device with a
battery, electric current may flow
from the electric device into the
vehicle and may cause a malfunc‐
tion of electric systems. Only use
electric devices which could pre‐
vent inverse current.
WARNING
Do not put a finger or a foreign ele‐
ment (pin, etc.) into a power outlet
and do not touch with a wet hand.
You may get an electric shock.
LCD monitor (clock and outside
temperature) (if equipped)
WARNING
Do not adjust the clock while driving.
You may lose your steering control
and cause an accident that results in
severe personal injury or death.
Whenever the battery terminals or re‐
lated fuses are disconnected, you must
reset the time.
When the ignition switch is in the ACC
or ON position, the clock buttons oper‐
ate as follows:
Hour (1)
Pressing the H button will advance the
time displayed by one hour.
Minute (2)
Pressing the M button will advance the
time displayed by one minute.
Display conversion:
- Clock
To change the 12 hour format to the
24 hour format, press the "H" and
"M" button at the same time for
more than 4 seconds.
For example, if the time is 10:15 p.m.,
the display will change to 22:15.
- Outside thermometer
To change the temperature unit F to
C (or C to F) press the "H" and "M"
button at the same time for 1 to 2
seconds.
Features of your vehicle
4-144