Kia CERATO 2018 Owner'S Manual Download Page 197

Page: 197 / 602

(Continued)

the washer solution could freeze on

the windshield and obscure your vi‐

sion.

CAUTION

• To prevent possible damage to the

wipers or windshield, do not oper‐

ate the wipers when the wind‐

shield is dry.

• To prevent damage to the wiper

blades, do not use gasoline, kero‐

sene, paint thinner, or other sol‐

vents on or near them.

• To prevent damage to the wiper

arms and other components, do

not attempt to move the wipers

manually.

• To prevent possible damage to the

wipers and washer system, use

anti-freezing washer fluids in the

winter season or cold weather.

Rear window wiper and washer

switch (5 door) (if equipped)

The rear window wiper and washer

switch is located at the end of the wip‐

er and washer switch lever. Turn the

switch to desired position to operate

the rear wiper and washer.

/ON -

Normal wiper operation

---/INT -

Intermittent wipe

O/OFF -

Wiper is not in operation

4-105

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 197 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: