manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 182 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 182

• This  system  activates  when  the

parking  assist  system  button  is

pressed with the ignition switch ON.

• The  indicator  of  the  parking  assist

system button turns on automatical‐

ly  and  activates  the  parking  assist

system  when  you  shift  the  gear  to

the  R  (Reverse)  position.  It  will  turn

off  automatically  when  you  drive

above 20 km/h (12.4 mph).

• The  sensing  distance  while  moving

forward  is  approximately  60  cm

(24  in.)  when  you  are  driving  less

than 10 km/h (6.2 mph).

• When  more  than  two  objects  are

sensed at the same time, the closest

one will be recognized first.

• If the vehicle speed is above 20 km/h,

the  system  automatically  turns  off.

To activate again, push the button.

NOTICE

It  may  not  operate  if  it s  distance

from  the  object  is  already  less  than

approximately 25 cm when the sys‐

tem is ON.

Features of your vehicle

 

 

4-90

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments