Kia CERATO 2018 Owner'S Manual Download Page 181

Page: 181 / 602

PARKING ASSIST SYSTEM (IF EQUIPPED)

The parking assist system assists the

driver during movement of the vehicle

by chiming if any object is sensed with‐

in the distance of 100 cm (39.3 in.) in

front and 120 cm (47 in.) behind the

vehicle.

This system is a supplemental system

and it is not intended to nor does it re‐

place the need for extreme care and

attention of the driver.

The sensing range and objects detecta‐

ble by the sensors are limited. Whenev‐

er moving pay as much attention to

what is in front and behind of you as

you would in a vehicle without a parking

assist system.

WARNING

The parking assist system should

only be considered as a supplemen‐

tary function. The driver must check

the front and rear view. The opera‐

tional function of the parking assist

system can be affected by many

factors and conditions of the sur‐

roundings, so the responsibility rests

always with the driver.

Operation of the parking assist

system

Operating condition

4-89

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 181 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: