Kia CERATO 2018 Owner'S Manual Download Page 179

Page: 179 / 602

Cruise indicator light (if

equipped)

This indicator light illumi‐

nates:

• When the cruise control system is

enabled.

For more details, refer to Cruise Con‐

trol System on page 6-47.

Cruise SET indicator light

(if equipped)

This indicator light illumi‐

nates:

• When the cruise control speed is set.

For more details, refer to Cruise Con‐

trol System on page 6-47.

KEY OUT indicator light

(if equipped)

When the ENGINE START/

STOP button is in the ACC or

ON position, if any door is open, the

system checks for the smart key.
This indicator light blinks:
When the smart key is not in the vehi‐

cle and any door is open with the igni‐

tion switch or Engine Start/Stop button

in the ACC or ON position.

- At this time, if you close all doors, the

chime will also sound for approxi‐

mately 5 seconds.

- The indicator will go off while the ve‐

hicle is moving.

SPORT Mode Indicator

Light (if equipped)

This indicator light illumi‐

nates:

• When you select SPORT mode as

drive mode.

For more details, refer to DRIVE Mode

Integrated Control System on page

6-52.

ECO Mode Indicator Light

(if equipped)

This indicator light illumi‐

nates:

• When you select ECO mode as drive

mode.

For more details, refer to DRIVE Mode

Integrated Control System on page

6-52.

Glow indicator light

(diesel engine)

This indicator light illumi‐

nates:

• When the engine is being preheated

with the ignition switch or Engine

Start/Stop Button in the ON position.

- The engine can be started after

the glow indicator light goes off.

- The illumination time varies with

the engine coolant temperature,

air temperature, and battery con‐

dition.

If the indicator light remains on or

blinks after the engine has warmed up

or while driving, there may a malfunc‐

tion with the engine preheating sys‐

tem.

In this case, have the vehicle inspected

by a professional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

NOTICE

Engine preheating

(Continued)

4-87

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 179 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: