Kia CERATO 2018 Owner'S Manual Download Page 178

Page: 178 / 602

- At this time, you can start the en‐

gine.

- The indicator light goes off after

starting the engine.

This indicator light blinks for a few sec‐

onds:

• When the smart key is not in the ve‐

hicle.

- At this time, you can not start the

engine.

This indicator light illuminates for

2 seconds and goes off:

• When the vehicle cannot detect the

smart key which is in the vehicle

while the Engine Start/Stop Button is

ON.

In this case, have the vehicle inspec‐

ted by a professional workshop. Kia

recommends to visit an authorized

Kia dealer/service partner.

This indicator light blinks:

• When the battery of the smart key is

weak.

- At this time, you cannot start the

engine. However, you can start the

engine if you press the Engine

Start/Stop Button with the smart

key. (For more details, refer to

Starting the Engine on page

6-07).

• When there is a malfunction with the

immobilizer system.

In this case, have the vehicle inspec‐

ted by a professional workshop. Kia

recommends to visit an authorized

Kia dealer/service partner.

Turn signal indicator light

This indicator light blinks:

• When you turn the turn

signal light on.

If any of the following occurs, there

may a malfunction with the turn signal

system. In this case, have the vehicle

inspected by a professional workshop.

Kia recommends to visit an authorized

Kia dealer/service partner.

- The indicator light does not blink but

illuminates.

- The indicator light blinks more rapid‐

ly.

- The indicator light does not illuminate

at all.

Low beam indicator light

(if equipped)

This indicator light illumi‐

nates:

• When the headlights are on.

High beam indicator light

This indicator light illumi‐

nates:

• When the headlights are

on and in the high beam position

• When the turn signal lever is pulled

into the Flash-to-Pass position.

Light ON indicator light

This indicator light illumi‐

nates:

• When the tail lights or

headlights are on.

Front fog indicator light

(if equipped)

This indicator light illumi‐

nates:

• When the front fog lights are on.

Rear fog indicator light

(if equipped)

This indicator light illumi‐

nates:

• When the rear fog lights are on.

Features of your vehicle

4-86

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 178 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: