manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 174 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 174

If there is a malfunction with either the

alternator  or  electrical  charging  sys‐

tem:

1. Drive  carefully  to  the  nearest  safe

location and stop your vehicle.

2. Turn  the  engine  off  and  check  the

alternator  drive  belt  for  looseness

or breakage.

If  the  belt  is  adjusted  properly,

there may be a problem in the elec‐

trical charging system.

In  this  case,  have  the  vehicle  in‐

spected by a professional workshop

as soon as possible.

Kia recommends to visit an author‐

ized Kia dealer/service partner.

Engine oil pressure

warning light

This  warning  light  illumi‐

nates:

• Once  you  set  the  ignition  switch  or

Engine  Start/Stop  Button  to  the  ON

position.

- It  remains  on  until  the  engine  is

started.

• When the engine oil pressure is low.

If the engine oil pressure is low:

1. Drive  carefully  to  the  nearest  safe

location and stop your vehicle.

2. Turn  the  engine  off  and  check  the

engine  oil  level  (For  more  details,

refer  to  Engine  oil   on  page

8-23). If the level is low, add oil as

required.

If  the  warning  light  remains  on  af‐

ter adding oil or if oil is not availa‐

ble, have the vehicle inspected by a

professional  workshop  as  soon  as

possible.  Kia  recommends  to  visit

an  authorized  Kia  dealer/service

partner.

CAUTION

n

Engine  Oil  Pressure  Warning

Light

• If the engine does not stop imme‐

diately  after  the  Engine  Oil  Pres‐

sure  Warning  Light  is  illuminated,

severe damage could result.

• If the warning light stays on while

the  engine  is  running,  it  indicates

that  there  may  be  serious  engine

damage  or  malfunction.  In  this

case,

1. Stop the vehicle as soon as it is

safe to do so.

(Continued)

(Continued)

2. Turn  off  the  engine  and  check

the  oil  level.  If  the  oil  level  is

low,  fill  the  engine  oil  to  the

proper level.

3. Start  the  engine  again.  If  the

warning light stays on after the

engine  is  started,  turn  the  en‐

gine  off  immediately.  In  this

case, have the vehicle inspected

by a professional workshop. Kia

recommends to visit an author‐

ized Kia dealer/service partner.

Low fuel level warning

light

This  warning  light  illumi‐

nates:
When the fuel tank is nearly empty.

If the fuel tank is nearly empty:
Add fuel as soon as possible.

CAUTION

n

Low fuel level

(Continued)

Features of your vehicle

 

 

4-82

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments