Kia CERATO 2018 Owner'S Manual Download Page 164

Page: 164 / 602

NOTICE

If any of the following conditions oc‐

curs, the mileage and days may be

incorrect.

- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.

User Settings Mode

On this mode, you can change setting

of the doors, lamps, and so on.

WARNING

Do not adjust the User Setting while

driving. You may lose your steering

control and cause severe personal

injury or accidents.

Driving Assist (if equipped)

• Rear Cross Traffic Alert (if equipped)

If this item is checked, the rear cross

traffic alert function will be activated.

For more details, refer to Blind Spot

Detection System on page 6-54.

Door

• Automatically Lock

- Off : The auto door lock operation

will be deactivated.

- Enable on Speed: All doors will be

automatically locked when the ve‐

hicle speed exceeds 15km/h

(9.3mph).

- Enable on Shift : All doors will be

automatically locked if the auto‐

matic transaxle / dual clutch trans‐

mission shift lever is shifted from

the P (Park) position to the R (Re‐

verse), N (Neutral), or D (Drive) po‐

sition.

Features of your vehicle

4-72

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 164 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: