Kia CERATO 2018 Owner'S Manual Download Page 161

Page: 161 / 602

This display shows trip distance (1),

average fuel economy (2) and the vehi‐

cle can be driven with the remaining

fuel (3).

This information is displayed for a few

seconds when you turn off the engine

and then goes off automatically. The

information provided is calculated ac‐

cording to each trip.

If the estimated distance is below 1km

(1mi.), the distance to empty (3) will

display as "---" and a refuel message

will appear (4).

LCD Modes (for Type B, Type C

instrument cluster)

1. Trip Computer mode

This mode displays driving informa‐

tion like the tripmeter, fuel econo‐

my, and so on.

For more details, refer to Trip

computer on page 4-64.

2. Turn By Turn mode (if equipped)

This mode displays the state of the

navigation.

3. Audio mode (if equipped)

This mode displays the state of the

A/V system.

4. Service mode

This mode informs of service inter‐

val (mileage or days) and pressure

status of each tire.

5. Master warning mode

This mode informs of warning

messages related to washer fluid

or malfunction of Blind Spot Detec‐

tion system (BSD) and so on.

6. User Setting mode

On this mode, you can change set‐

tings of the doors, lamps and so on.

❈

For controlling the LCD modes, re‐

fer to LCD window Control on

page 4-55.

Turn By Turn Mode (if equipped)

This mode displays the state of the

navigation.

4-69

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 161 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: