Kia CERATO 2018 Owner'S Manual Download Page 107

Page: 107 / 602

• Lock the doors by pressing the

lock button on the smart key.

After completion of the steps

above, the hazard warning lights

will operate once to indicate that

the system is armed.

If any door, trunk lid (tailgate) or

engine hood remains open, the

hazard warning lights won't oper‐

ate and theft-alarm will not arm.

After this, if all doors, trunk lid

(tailgate) and engine hood are

closed, the hazard warning lights

blink once.

Using the transmitter

Park the vehicle and stop the engine.

Arm the system as described below.

1. Turn off the engine and remove the

ignition key from the ignition

switch.

2. Make sure that all doors, the en‐

gine hood and trunk lid (tailgate)

are closed and latched.

3. Lock the doors by pressing the lock

button on the transmitter.

After completion of the steps

above, the hazard warning lights

will blink once to indicate that the

system is armed.

If any door, trunk lid (tailgate) or

engine hood remains open, the haz‐

ard warning lights won't operate

and theft-alarm will not arm. After

this, if all doors, trunk lid (tailgate)

and engine hood are closed, the

hazard warning lights blink once.

Do not arm the system until all passen‐

gers have left the vehicle. If the system

is armed while a passenger(s) remains

in the vehicle, the alarm may be activa‐

ted when the remaining passenger(s)

leave the vehicle. If any door, trunk

(tailgate) or engine hood is opened

within 30 seconds after the system en‐

ters the armed stage, the system is

disarmed to prevent unnecessary

alarm.

Theft-alarm stage

The alarm will be activated if any of the

following occurs while the system is

armed.

• A front or rear door is opened with‐

out using the transmitter (or smart

key).

• The trunk is opened without using

the transmitter (or smart key).

• The engine hood is opened.

The hazard warning lights will blink

continuously for 27 seconds, unless the

system is disarmed. To turn off the

system, unlock the doors with the

transmitter (or smart key).

NOTICE

Immobilizer system

• If the system is not disarmed with

the transmitter, insert the key in‐

to the ignition switch and start the

engine. Then the system will be

disarmed.

• If you lose your keys, Kia recom‐

mends to visit an authorized Kia

dealer/service partner.

4-15

Featur

es of your v

ehicle

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 107 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: